INDIA – SURAT
Double inlet fans, located behind a filter, for gas extraction in a steel plant. High efficiency impellers with airfoil type blades, to achieve lower electrical consumption.
SPAIN – CORUÑA
Fans for the wet purification of gases process. The high water concentration in the gas requires a special impeller design to prevent dust particles from adhering. The flow control is carried out by Inlet Guide Vanes.
SPAIN – ALAVA
Fans for the depuration of gases extracted from a foundry. Maximum volumes up to 800,000 m3/h per fan. Outlet silencer installed to minimize the noise diffused by the stack.
RUSSIA – PNTZ
Fans designed for gases coming from a steel plant. The motors driving each of the fans are 2.5 MW. The outlet silencers installed reduce the generated noise down to 78 dB (A).
RUSSIA – SEVERSKIY
Fans for the gas extraction, designed in accordance with the GOST standards and suitable for operation at low ambient temperatures, reaching - 40 °C. The flow control is performed by means of inlet dampers mounted at the fan inlets.
SPAIN – CANTABRIA
Single inlet fan, located just behind a bag filter, for the dust extraction from a foundry. Special design in CORTEN type plate to minimize the oxidation of the fans and ducts.
FRANCE – FLORANGE
Double inlet fans handling hot gases (250°C) previously filtered in an electro-filter. Designed for quick and simple disassembly and maintenance.
